Setting and cancel of Audi A4 transportation mode
Time: 2017-05-10 Reads: 1555 Edit: Admin
1, Connect Fcar and turn on ignition switch;
2, Input “17”to enter combination instrument (Radio is 56)
3, Input”10”function for adaptive;
4, Input channel No”99”, set the value as 1(transportation mode active),0(cancel transportation mode).
The corresponding operation also can be done through VAS5051 function navigation.
1, Select ”Boot type function query”;
2, Select “Vehicle system or function select “interface:
3, Select “17-combination instrument”;
4, Select “Set or close transportation mode”(radio and combination instrument),then
transportation mode of radio and combination instrument can be closed at the same
This operation can also be done by selecting “56-Radio“on “vehicle system or function select”
2, Setting and cancel of Audi A6L transportation mode
Due to electronic parts used on vehicle more than Audi A6L, the demand for electric energy increases. In order to monitoring load state within battery, in extreme cases , need to regulate electrical equipment through comfort CAN(Car LAN)to prevent battery over discharging, so as to ensure vehicle can start at any time. So A6L is the same with A8D3, added power management control unit (J644).
Setting and cancel of transportation mode for A6L is different from A4
1, Connect Fcar, turn on ignition switch;
2, Select” 61-battery regulator”
3, Select”10 function adaptive”;
4, Input channel No. “01”, set value as 0(cancel transportation mode),1(setting transportation mode).
The corresponding operation also can be conducted through boot type function navigation.
1, Select “Boot type function query”
2, Select “Vehicle system or function select” interface;
3, Select “maintenance work”(See Pic.3)
4, Select” J644 power management enable/disable transportation mode” and follow steps.